Before the survey is carried out, the space of the measurement points needs to be established in the Hypack survey software. Each cross section line is roughly perpendicular to the shoreline with an interval of 200 meters. The river cross-section survey data collection and recording is carried out by the laptop computer with the Hypack survey software. The echo sounder is controlled by the computer to collect water depth signals in an electronic form and then transformed into a digital form (i.e. The sounding pole of the echo sounder and the GPS rover station antenna are put in the identical horizontal position. The SDH-13D digital echo depth sounder is used to measure water depth of the points. Coordinates of the mobile station are computed using both the received GPS satellite information and the differential information from the reference station via the data link. A common set of GPS satellites are recorded at both the reference and rover stations simultaneously. GPS roving station is located in a powerboat for bathymetric survey. GPS reference stations are located at open, ashore known points so that the reception of GPS satellite signals is not potentially blocked and the data link of GPS signal transmission does not pose any problem. The cross-section interval will be set about 200 meters apart, and Trimble 5700 GPS is used to fix horizontal position. The works are performed by the Azovo-Chernomorsky Basin Branch in compliance with the technical task, which is an inseparable part of the contract, and in accordance with the terms and conditions of the contract.Cross-section survey of the river depends on cross-section measurement method used. 19, Novorossiysk, Krasnodar Territory, Russia, 353900. The signed contract shall be sent back to the Azovo-Chernomorsky Basin Branch by the address: Sovetov str. If the client’s answer is positive, a draft standard contract is sent to the client for signing.
To order geodesic and hydrographic works in Anapa, Gelendzhik, Eysk, Kavkaz, Novorossiysk, Sochi, Temryuk and Tuapse seaports, the client shall send a written application to the Azovo-Chernomorsky Basin Branch by fax: +7 (8617) 67-64-00 or e-mail: application shall be reviewed by the Azovo-Chernomorsky Basin Branch and within 10 days a written answer will be sent to the client stating the technical possibility, term and cost of the requested works. and HYPACK/HYSWEEP special program software.
In Anapa, Gelendzhik and Novorossiysk Seaport:Ī) Reason SeaBat T20P automated hydrographic survey complex based on a multi-beam echo sounder Ĭ) Odom Echotrac CVM one-beam echo sounder į) LEICA TSO2 plus R500 5" total station ĭata is processed by HYPACK and Leica Geo Office software.Ī) Simrad ЕА-400SP one-beam echo sounder Ī) Simrad ЕА-400SP one-beam echo sounder ĭata is processed by QINSy special program software.Ī) Simrad ЕА-400 and Simrad ЕА-400SP one-beam echo sounders ī) Trimble SPS 461 and Trimble SPS 855 GPS receivers Ĭ) automated hydrographic survey complex on the basis of Reason SeaBat T20P multibeam echo sounder.ĭata is processed by HYPACK special program software.Ī) R2Sonic 2022 automated hydrographic survey complex based on a multi-beam echo sounder ĭata is processed QINSy/Cloud v.8.1. Besides, the Branch disposes of marine vessels with necessary technical equipment and software, such as: The Azovo-Chernomorsky Basin Branch has highly-qualified personnel with large experience in hydrography and geodesy, including geodesic and hydrographic surveys. The detailed mapping materials can be used for corrections of nautical charts, guidelines and instructions for navigation, as well as for dredging planning. definition of coordinates of survey objects. definition of coordinates and altitudes by means of static GPS measurements detailed bottom relief mapping by means of areal inspection detailed bottom mapping by means of survey In particular, the Azovo-Chernomorsky Basin Branch performs the following activities in Anapa, Gelendzhik, Eysk, Kavkaz, Novorossiysk, Sochi, Temryuk and Tuapse seaports: The FSUE “Rosmorport” Azovo-Chernomorsky Basin Branch on a contract basis provides geodesic and hydrographic services in the waters of Anapa, Gelendzhik, Yeysk, Kavkaz, Novorossiysk, Sochi, Temryuk and Tuapse seaports. Terms and conditions of geodesic and hydrographic services Center for Corporate Information DisclosureĢ.Strategy of Russian Port Infrastructure Development.